Canopus MediaEdge-STB3 Guia de preparacion descargar pdf (Pagina 43)

-35-

MediaEdge

- FEC mode

Enables/Disables the FEC (Forward Error Correction) mode.

- Telnet

Speciﬁ es if the Telnet function is used.

- SNMP

Speciﬁ es the settings on SNMP, which is the protocol that collectively controls the

connected devices on the network.

- Buffering time

Select the buffering time (video delay time) from 0/200/500/1000 milliseconds.

[Serial port]

- Remote serial

Sets the remote serial communication. Select [Disabled], [Connect with the linked

server], or [Connect with the ﬁ xed host].

Disabled: Disables remote serial communication.

Connect with the linked server: Executes the remote serial connection in sync with

the stream server connected.

Connect with the ﬁ xed host: Always connects to a ﬁ xed host.

- Host name or IP address

Specifies the host name or IP address of the host computer for remote serial

communication.

- Host port number

Speciﬁ es the port number of the host computer for remote serial communication.

- Standby port number

Speciﬁ es the port number to be used to send/receive serial commands.

- Protocol

Speciﬁ es the communication protocol. Select TCP or UDP.

- Baud rate

Speciﬁ es the communication speed of the serial port.

- Data bits

Speciﬁ es the data bit length.

- Parity

Speciﬁ es the parity (technique for detecting data errors).

- Stop Bits

Speciﬁ es the stop bit length.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 67 68

Sin comentarios

Canopus MediaEdge-STB3 Guia de preparacion Pagina 43